Sharp IQ-8900, IQ-8920 manual Assigning DST to a city

You can set up to three cities by entering information in the three fields. In the unit’s default settings, New York has been designated as USER CITYI.

4.Move to the field you would like to change-USER CITYI, 2, or 3.

5.Press lo> [NEW) to delete the current setting and enter the name of your desired city.

6.Move to the COUNTRY field.

7.Delete the current setting and enter the name of the country where the city is located.

8.Move to the GMT (Greenwich Mean Time) field.

9.Enter the time difference between your city and Greenwich Mean Time (the international time reference). Press I-1 before a number for a negative time difference. You can specify any value from -11.5 to +I 2 with 0.5 hour precision.

10.Touch -1.

The city you entered is set as a User city, and is listed on the first page on both the Home and World city lists.

To select the User city you have just entered as the Home or World city, see p. 182 or p. 185, respectively.

Daylight saving time

w-v

Assigning DST to a city

Designating daylight saving time for a city automatically sets the time for that city one hour ahead.

This can be done using either the Home city or World city list, accessed from the menu.

1.Press [m), touch vj, and select SET CLOCK.

2.Select either CHANGE HOME CITY or CHANGE WORLD CITY.

3.Bring the desired city to the display using (PREV) and

[m], then select it.

4. Touch j DST ON 4, OFF I.

187