Sharp IQ-8920, IQ-8900 manual Problem Connection with remote unit Terminates unexpectedly

Problem:	Remote unit answers but received
	characters are garbled.
User message: None.
Cause:	Incorrect parity, data bits, or stop bits
	setting.
	Excessive line noise.
Solution:	Change parity, data bits and/or stop bits
	configuration settings.
	Wait until line noise subsides-and try
	again.

Problem: Connection with remote unit

	terminates unexpectedly.
User message: None.
Cause:	Surge of line noise, user error, etc.
Solution:	Try again.

Problem:	Dialing terminated unexpectedly.
User message: There was a problem during the dialing
	and auto dialing was terminated.
Cause:	Incorrect phone number entered.
	Incorrect line type selected (tone or
	pulse).
	Modem not connected to phone line.
Solution:	Press @ and check the phone number
	in the Dialing Directory.
	Check the Line Type setting in the
	MODEM SETTING window.

Check that the modem is connected correctly to the unit and the telephone line.

Problem: Auto log-on fails.

User message: There was a problem during the auto log

	on. Please check out the auto log on
Cause:	commands.
	Incorrect auto log-on settings.
Solution:	Excessive line noise.
	Check auto log-on settings. In particular,
	make sure the Sy and Ry character
	strings are correct and that ; is included

272