Sharp IQ-8920, IQ-8900 manual Speaker, Wake UP, Redial, 256

SPEAKER

If your modem has a built-in speaker, selecting ON lets you hear the dialing and connection tones. The speaker is turned off automatically after a connection is made.

WAKE UP

If set to ON, the unit will automatically turn on in the Terminal mode when called by a remote system unless ASK PASSWORD for the start-up display is set to ON. There are other hardware/software requirements for using this function. For more information, contact your local SHARP dealer.

REDIAL

This is the number of times the unit will redial a number if a connection is not made on the first attempt -if the number was busy or did not answer, for example. The number can be set in the range O-99.

Of the settings above, the most important is the line type. Selecting an incorrect line type will not damage the modem or unit, but it will make it impossible to connect with a remote unit using the modem.

2. Touch any desired settings to select them.

*’ Use II) and m to move between fields, and (,) and 11] to select the desired settings.

3.Use the number keys to set REDIAL.

4.Touch -1 when you have finished with the settings.

Dialing You set data transfer parameters for making dialing

settings connections using the Setting display of the Dialing Directory. Each entry that you make can have its own settings, so that you can dial a number simply by selecting the desired entry.

In the Terminal mode,

256