batteries. If an IC card contains its own batteries, confirm that those batteries are not depleted before removing the card from the unit.

Replace the two operating batteries at the same time with new batteries of the same type.

The memory backup battery installed at the factory at the time of manufacture may have become depleted during shipment and may not have the full battery life indicated in the specifications.

Caution:

Keep batteries out of the reach of children.

Remove batteries from the unit when they become weak or when the unit is not to be used for a long period of time. Leaving weak batteries in the unit may cause battery leakage and damage from corrosion.

Do not dispose of batteries by fire as they may explode.

Replacing When using the unit, if the m symbol appears at the the operating top of the display, the operating batteries may need to be

batteries replaced. To confirm this, turn the unit off and then on again. If the display shown below appears, replace both of the operating batteries immediately.

1.Turn off the unit.

2.Set the battery replacement switch on the back of the unit to “REPLACE BATTERIES” (a red dot will be visible).

3.Slide off the operation battery cover.

302

Page 303
Image 303
Sharp IQ-8920, IQ-8900 manual Slide off the operation battery cover, 302