Sharp IQ-8920, IQ-8900 manual Points to Remember When Using Peripherals

Points to Remember When Using Peripherals

When using IC cards formatted for units other than 8900/9000 Series:

•Cards that are 3.4 mm thick, such as the IQ-780s and application cards of the IQ-775/lQ-776 format, cannot be used with this unit. Forcing these cards into the unit may cause damage.

•The IQ-709A, IQ-72’1 and IQ-8802 cards cannot be used with this unit.

•The following keys on this unit cannot be used (refer to

the IC card operation manual as regards the other keys):

[SCRAPBOOK] (G] (SEND) (GV$ (DATE sm4h~P] [PRINT SCREEN) [KGRq (CUT) (MENU)

•The vl key mentioned in IC card operation manuals is re resented b the C2ndj key on this unit.

Also, theEkl&SHIFT FUNCTION key operation is performed by pressin C2nd) then touching m, and the (SHIFT/ (OPT10 operation by pressing (2nd) m. The displays for these operations might be different from those in the IC card manuals.

•To transfer data from a card, first select card memory,

m. To transfer data from the unit, touch 1 PERIPHERALS 1 after

selecting any application on the unit. To use the Memory Check or Data Deletion functions with a card, first select card memory then press i2ndj (w) .

•You cannot move the cursor by touching the IC card window and you cannot highlight text in it by dragging. Use the cursor keys to move the cursor.

•When using the IQ-702A, IQ-704B, IQ-71 1 B, IQ-712B, IQ-715A, IQ-716B, IQ-8DOlA, you can enter data in the clipboard by pressing [2ndj I%%%). However, you cannot enter data in the clipboard if the amount of free memory is small.

•The following cards can be used in conjunction with most of the unit’s built-in applications. Press [m)

[m)to access these dictionaries while using a

274