Sharp IQ-8900, IQ-8920 manual III Left

You can specify as many indents as you want in an entry. However, it is not possible to change the setting in the middle of a paragraph (which ends with J).

The maximum number of characters you can specify for indents depends on the page format (see p. 153).

1.In the Edit mode, place the cursor on the line where you want to start indenting.

2.Press [MENU) , touch -1, and select SET INDENTS.

Indicates the current setting in the cursor position line.

\

SET INDENTS

;INDENTING i

III LEFT			I f 0	*	III
		. . . . . . . . . . . . . . ..
II	RIGHT	* . . . .	/0	*
	. . . . . . . . . . . . . . . . . . . . . . . . . . .		. .:i. . .1
	FIRST LINE

r

II

The number of characters to indent text from the left and right, respectively.

‘The number of characters to indent tl78 first line of each new paragraph.

3.Select ON in the INDENTING field.

4.Move to the field you want to set an indent for. Press

(m)to delete the current value and enter the number of characters you want to indent.

5.Touch [ml when you have finished making all the desired settings (or ICANCEl-1 to cancel the settings).

When indenting is turned on, 10 is shown on the display at the indent position. All current text or text entered after

qwill be indented the specified number of characters from the left or right until indenting is turned off or changed.

149