2 Introduction
The XP-COMPACT is a sine wave inverter with integrated battery charger and solar charge con- troller with many additional functions, it has been developed to be used as stand-alone (no grid feeding) AC provider, or as continuous / break-free current supply provider (UPS).
2.1Principle schematic
AC IN
| L | | | | | | 1uF | 10nF | | | | | AC OUT |
| | | 100nF | | | | | | | L |
Input | | | | | | | | | | | |
PE | | | | | | | | | | | PE Output |
230Vac | | | | | | | | | | | |
N | | | | | | | | | | | | | | 230Vac |
| | | | | | | | | | | | N |
| | | | | | | | | 10nF | | |
| | | | | | | | | | | | | |
| | | | | | | | | | | | | |
| | 4x2,7MΩ | | Filter | | | | | | | | | AUX. CONT. |
Battery | | | | | | | | | | | | | |
| | | | | | | | | | | | | |
| | | Inverter | | | | | | | | |
BATTERY | 150A | | | | | | | | | |
| | | Charger | | | | | | | | |
CT35 | | 1uF | 1uF | | | | | | | | | | | |
Temp. Sensor | | | | | Microprocessor, | | | | | |
| | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| SOLAR | | | | | Control, Adjustment | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
Solarmodule | | | | | | | | Display | | | | Remote control |
| | | | | | | | | | |
| | | | | | | | | | | | | | | Remote control |
| | | | RJ11 | | | |
| Max. 6m | Temp. | 6p | 8p | Remote control | Max. 40m |
| |
| | | |
| | | | | |
RCCCOMPACT-01 | INVERTER - CHARGER | | |
TRANSFER | | |
AC IN | AC OUT | A | % |
| 160 |
CHARGER | INVERTER | | 130 |
| RESET | 70 | 100 |
SOLAR CHARGE | ALARM | 60 | 80 |
(Select) | 50 | 60 |
EQUALIZE | | 40 | 40 |
Over Temp. | 30 | 20 |
| Overload | 20 | 10 |
Program | Battery | 10 | 5 |
| Low/High | g | Inv |
Contact active | | ert |
| | er |
Contact manual | OFF | | |
AUXILIARY (Program)CONTACT | (ChangeON/ OFFstatus) |
2.2Description of main functions
2.2.1The inverter
The sinewave inverter built in the XP-COMPACT generates a sinusoidal AC voltage with an excep- tionally precise voltage and stabilized frequency. In order to start large electric motors, the user has the possibility to employ a short-start-power which is 3-times the nominal power of the XP-
COMPACT.
The inverter is protected against overload and short-circuits. A power stage with the latest MOS- FET power transistors, a toroidal transformer and a fast regulating system make-up a robust and reliable inverter with highest efficiency. A 1-20 Watt adjustable charge detection system serves to provide the smallest energy consumption and ensures a long life for the battery.
2.2.2The transfer system
XP-COMPACT can be connected to an AC source, for example a stand-by emergency generator or the AC network. With the transfer system, on one side you have an alternating voltage at the output for use by the connected consumer appliances. On the other side the batteries are charged. The distribution of energy between the consumer appliances and battery charger is automatic.
2.2.3The battery charger
The built-in battery charger is so designed that it can charge the battery quickly and fully. A micro- processor controlled, 3 to 4 Step charging process ensures the optimum charging of the batteries. The desired charging current can be set continuously from 0 to maximum, according with particular
User manual | XP-COMPACT V2.0 E | 5 |
