ZyXEL Communications 100IH manual Chapter Dial-in Server Configuration

Prestige 100 and 100IH ISDN Router and Router/Hub

Chapter 6

Dial-in Server Configuration

You can configure your Prestige to receive calls from remote dial-in users, e.g., telecommuters, as well as remote nodes. There are several differences between dial-in users and remote nodes, as summarized in the table below.

Table 6-1 Remote Dial-in Users/Remote Nodes Comparison Chart

Remote Dial-in Users	Remote Nodes
Your Prestige will only answer calls from remote	Your Prestige can make calls to and receive calls
dial-in users; it will not make calls to them.	from the remote node.
All remote dial-in users share one common set of	Each remote node can have its own set of
parameters, as defined in the Default Dial In Setup	parameters such as Bandwidth On Demand.
(Menu 13).

This chapter discusses how to setup default dial-in parameters for both remote node and remote dial-in users. The following sections give two examples of how your Prestige can be configured as a dial-in server.

Dial-In Server Configuration 6-1