Prestige 100 and 100IH ISDN Router and Router/Hub
Chapter 9 Telnet Configuration and Capabilities
9.1About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port. Once your Prestige is configured, you can use telnet to configure it remotely as shown below.
Figure 9-1 Telnet Configuration on a TCP/IP Network
9.2Telnet Under SUA
When Single User Account (SUA) is enabled and an inside telnet server is specified, telnet connections from the outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you must first telnet to the inside server, and then telnet from the server to the Prestige using its inside LAN IP address. If no insider server is specified, telnet to the SUA ’s IP address will connect to the Prestige directly.
Telnet Configuration |
