LM6488 User Manual
Detailed Configuration: Twinax Display Session
The Connection Manager has two tabs, “Connections” and “Configure”. You first need to “ Configure” the display and / or printer sessions before selecting the “Connections” tab to activate or deactivate sessions.
Select “Configure”, then “Add” and the New Connection menu will appear. Scroll through the various options until you come to the selection
“NLynx Twinax Emulation”, highlight it and click on “OK” and the “Configure Connection” panel will be displayed. The Configure Connection panel has several tabs that are used to configure all of the features and options of the Twinax display and printer session. As described earlier, the first task is to configure the Twinax connection from the Twinax tab.
NOTE: at this time DO NOT select the “NLynx Telnet Emulator” as this selection is for configuring an Ethernet (Telnet) connection to an IBM host.
In this example we have used “TEST1” as the connection name. This unique name is used in the Connection Manager to differentiate one session from another. By default, Display and
As shown below, you can scroll through the Model options until you find the IBM terminal emulation that best suits your personal preferences or the IBM host application. And it is important to select a unique Host Address (0 through 6) for each of the display and printer sessions that you configure that is not used by any other device on the same Twinax port at the IBM host.
Copyright © | User Manual, | May 19, 2008. | Page 5 |
