Ringdale LM-6488 user manual The “Display” tab includes all of the following options

LM6488 User Manual

The “General” tab is where you select the display language (English is the only selection at present). It is strongly recommended that the selection

“Display warning message” is enabled, as this ensures that you are asked to confirm each time you select to disconnect a session. If you want the session to be displayed as a full screen (as opposed to tiled or windowed), enable “Full Screen Mode”.

This selection will also activate the buttons so that you can select none; one or both Status bars to be displayed at the bottom of the twinax session screen.

The “Display” tab includes all of the following options:

Cursor: Block, Underline, Blink.

Field Separator: Vertical Line, Period, Middle

Dot, Space.

Hot Spots: Show, Roll Over, Enable/Disable

Rule Cursor: Enable/Disable; Horizontal, Vertical,

Cross-Hair.

Font Options: Lucinda, Courier New, Host

Connect Grafix.

Style: Regular, Bold, Italic, Bold Italic

You can select or deselect your preferences by clicking on the appropriate buttons.

If a color monitor is attached to the LM-6488, you can use the features under the “Color” tab to customize the presentation of data, background and foreground colors. This utility is self- explanatory and the “Default” button is an ideal way to reset the colors back to the factory defaults after experimenting with the various combinations.

Copyright © 1995-2008 Ringdale User Manual, 62-34880000 May 19, 2008. Page 6