Sharp IQ-8900, IQ-8920 manual Tab settings, Edit mode, press Cmenu , touch 1-1, and select SET Tabs

follows or is entered subsequently is laid out according to the new setting.

I@ • If the cursor is positioned anywhere within a paragraph, the whole paragraph and all text following it will be laid out according to the new setting. A setting change can only be made starting from a line which is immediately preceded by J.

•If you have changed any of the indent settings and attempt to store the new settings without selecting ON in the INDENTING field, the unit will prompt you to recheck the settings.

Tab settings

In the default settings, eight tab positions are specified at intervals of four characters each. Pressing IO) IJ) moves the cursor to the next tab position to the right. In the insertion mode, this shifts any text following the cursor. (This works only in the Notebook application.) You can change the default four-character setting for each individual entry using SET TABS in the application menu.

As with indents, the unit for this setting is the number of characters. You can have up to eight tab settings per line.

1.In the Edit mode, press CMENU) , touch 1-1, and select SET TABS.

SET TABS pEf--J~l

~1

. . . . . . . . . . . . . . . . . . . . . .+..----- ” + I .. I

TAB 1 sets the first tab position, TAB 2 sets the second, etc. Tab position settings are measured by the number of characters from the beginning of the line.

151