Sharp IQ-8900, IQ-8920 manual Exchanging Information with a Personal Computer, 251

+ You can also transfer data from units that are not 8900/9000 Series using a RAM card or via the PC-Link mode. See p. 241 and p. 251, respectively.

Transferring To transfer data between two units, you can also select data to/from an application on the RAM card to transfer data either to a RAM card or from.

application Simply press (6%6) to select the card memory in the application in which you want to send or receive the data, then press [GET) or [SEND) , or open the PERIPHERALS menu.

To receive single entries using [m] or Filer folders in the card memory by either infrared or cable transfer, first select the card memory using SET DATA DESTINATION in the PERIPHERALS menu on the receiving unit.

Exchanging Information with a Personal	q:
Computer
Using SHARP’s optional Organizer Link software and
cable package or certain third party software packages,
you can exchange data with a personal computer. Certain
software will allow you to exchange data with a personal
computer via the unit’s infrared port using the optional
CE-IR2 wireless interface. This makes it possible, for
example, to use the unit when outside your home or
office, then later transfer the data you have entered on
the unit to your desktop computer.

To set-up the unit for use with the Organizer Link:

1.Make sure the unit is turned off.

2.• For infrared transfer, set up the unit with the CE-IR2 wireless interface. (See the CE-IR2 manual for details.)

•For a cable transfer, connect the Organizer Link cable to the unit’s 15-pin cable jack. (See the unit Link manual for details.)

251