Sharp IQ-8900, IQ-8920 manual Touch I= Settings for the dialing entry are now stored

3.Move to the NUMBER field.

4.Enter the telephone number (if it is not a local number, be sure to include the area code).

5.Move to the SPEED (bps) field.

Data transmission can only go as fast as the slowesf of the two modems-your modem and the modem on the remote computer-being used. If one modem is capable of 2400 bps transmission speed and the other of 1200 bps, 1200 bps will have to be used.

6.Select the transmission speed.

7.Make any other necessary setting changes.

8.Press (2nd) m if you want to make it necessary to enter a password to access this entry (see p. 282). (Press (2ndJ [-iI again to deselect it.)

NIJMBER		:		,				. . . .
_____..	_....____.__
SPEED(bps): 300 m 2400 4800 9600
__ __ . . .		__ __	__ _	._ _____.__.. .	__ ._ ___. . .	. . . .	. . . .	. . . . .. . . .
P,ARITY					:m ODD EVEN
_..._..	__.__				:1 .	. 7 ._....	_.____
IIATA BITS				_.___ . . . . ___._		. . . . _. . .
__ _	. . . _. ._ ___ ______ ._ ..				. . . .:a		. . . . . . . . . .
STOP BITS .			..__	____.. . ___....		2
___ __ _._ _ ._					. . ..____ _...	. . . . . .	. . . . .	. . .
X0t1/X0f		f			:m OFF ..		_
___....	___				:m	m
LOCAL		ECHO

9. Touch I=[.

The settings for the dialing entry are now stored.

• If you are calling from a private PBX telephone system, you may have to dial 9 or some other number to get an outside line before dialing the number you want.

Connection to an outside line on a PBX system usually takes a second or two, so if the modem immediately dials the number you want to call, part of the dialed number may be lost. To avoid this problem, put a comma (,) at the appropriate place(s) in the telephone number, which instructs the modem to pause when dialing.

259