Ricoh VT3800 manual How To Change The Settings Of Service Programs, Procedure

CHANGING DEFAULT SElllNGS (SERVICE PROGRAM MODE)
How To Change The Settings Of Service	d

Programs

CIYou can register SP No. 29, 79, 84, 87, 88, 89 or 142 in the CS Mode key . (- See page 117.), and change their settings using the CS Mode key. (~

See page 119- 129.)

a

Procedure 1	1
	..
	E

After entering the desired SP No., press the Enter key. The value or mode set at the factory will be displayed at the end of the second line on the guidance display.

If you designate the wrong SP No., press the Clear Modes key. Then, re-enter the desired SP No.

ElEnter the desired value or mode using the Number keys.

ElPress the Enter key to store the desired value or mode.

nIf you enter the wrong value or mode, press the Clear Modes key. Then, go back to step 1.

115