CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No. | Mode |
Background
46Pattern Default Setting
Directional
Magnification
50
Mode
Selection
Quality Start
79
setting
Function,4
This function can be used only when you have the optional
D Default: O
~Adjustment value:
1 to 40, 51 to 90, 101 to 140, 151 to 190 0: No background pattern
You can select whether you can input the reproduction ratios for each vertical and horizontal directions or you can input each vertical and horizontal lengths of original and print paper.
~ ~efau,t. o
D Adjustment value:
O: reproduction ratio
1:vertical and horizontal lengths of original and print paper
If the machine is not used for a long period of time, the image density might decrease because the ink on the drum might dry. Printing quality can be regained by making a few prints. The Quality Start function recovers the image density quality and it prevents you from making extra prints. When you set the Quality Start function to be “Yes”,you can also select how many times the Quality Start mode is carried out for each master making. Also, when you set the Quality Start function to be “Yes”,the bold letters or solid images may be light.
CI Default: Quality Start mode: O
Time:2
D Adjustment value: |
|
Quality Start mode: | O: No 1: Yes |
Time: | 0 to 10 times |
D If you use the Quality Start function before 6 hours have passed after the last operation, the image density may not be recovered earlier. However, it is convenient to use this function when you change drum unit and make prints before 6 hours have passed after the last operation.
133
