
PREPARING IMAGE
PREPARING IMAGE MAKE-UP
Outline
are fed first so that the machine can recognize the areas of the original which are to be edited as designated areas.
Command sheet
c1 The command sheet is a sheet of paper for designating areas to be edited.
Command sheets must be made on white or translucent paper, and should be the same size as the original.
c1 Poor quality paper (such as newsprint, recycled paper, etc.) should not be used for command sheets because any dark spots or streaks will be read as designated areas.
c1 Do not use blotting paper or other absorbent papers for command sheets because ink might leak through the paper and get the exposure glass dirty.
c1 You can designate areas inside the limits given below.
5 mm, 0.2”
i
3 mm, 0.12” | 3 mm, 0.12” |
|
I
3 mm, 0.12”
I
7