
GUIDE TO COMPONENTS
1.Main Switch
2.Master Eject Container Cover
3.Paper Delivery Side Plates
4.Paper Delivery End Plate
5.Small Size Paper Delivery End Plate
Use to turn the power on or off.
Open when removing the master eject box.
Use to align the prints on the paper delivery ta- ble.
Use to align the leading edge of prints larger than A4, 81/2” x 11”.
Use to align the leading edge of prints that are A4, 81/2” x 11” or smaller.
6.Paper Delivery Table Completed prints are delivered here.
7.Ink Holder
8.Drum Unit
9.Drum Unit Lock
Lever
1o*Drum Rotation
Button
11.Pressure Release
Lever
12.Master Cut Button
13.Master Eject Unit Open Button
Set the ink cartridge in this holder.
The master is wrapped around this unit.
Lift to unlock and pull out the drum unit.
Press to rotate the drum unit.
Use to install the master roll.
Press this button to cut the master leading edge after installing a new master roll.
Press to remove misfed paper or a misfed mas- ter.
4