
TROUBLESHOOTING
Check the following adjustments before restarting the printing run.
nIs the paper feed pressure properly adjusted?
c1 The standard position of the pres-
sure lever is up. If you print on thick paper (127.9 to 209.3 g/m2,
34.0to 55.6 lb), push the lever
down.
ElIs the separation roller pressure properly adjusted?
c1 The standard position of the sepa- ration pressure levers is the lower position. If
H Are the side plate pads in the correct positions?
DTo print on thin paper (47.1 to 52.3 g/m2, 12.5 to 13.9 lb), slide the lev- ers (behind the paper feed side plates) in the direction of the arrow (see illustration).
175