CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
5P No. | Mode |
Auto
88Memory/Class mode
89 Tint mode setting
Resettable Total
113Master/Copy Counter
Clear Resettable
114Total Master/Copy Counter
120 User Code Mode
Function
In this function, the machine stops printing for 2 seconds after one set of prints are completed in Class or Memory mode. This gives you the chance to separate each set when you do not have an optional tape dispenser. For example, you can remove prints one by one from the paper delivery table or insert one sheet of paper between the prints.
n Default: O
n Adjustment value:
O: Memory/Class mode
1: Auto Memory/Class mode
Reproduce tint image.
~ Default: O
0 Adjustment value: | O: No 1: Yes |
Used to display the total number of masters and prints.
DM: Total number of masters
P:Total number of prints
Clears the resettable total master/copy counter.
~ ~efau,t. *
o Adjustment value: | O: No 1: Yes |
Selects user code mode. When you set this function, you have to also specify the auto reset time. For details about user code mode,
-see page 139.
o Default: User Code mode: O Auto Reset time: O
a Adjustment | value: |
|
|
User Code | mode: | O: No | 1: Yes |
Auto Reset | time: | O: No | 1 to 5 minute: |
136
