o When you use originals with light lettering, edges of the letters may be printed clearly and the inside of the letters may be light. In this case, in- crease the image density.

aWhen you use originals of fine letters, letters on prints may be skipped. In this case, increase the image density or use Line mode.

D Up to 1,000 sheets of paper can be delivered to the paper delivery table. However, if 500 or more sheets of paper are delivered to the paper delivery table, the leading edge of the prints might become stained.

Print Paper

n When you use non-standard paper, some parts of the image might not ap- pear on the print. In this case, set the machine not to detect paper size using the Service Programs. = See page 137.

aWhen the paper is curled, stack the paper with the curl face down, othemuise the paper might wrap around the drum or stains may appear.

D Postcards and the like do not absorb ink well. Offset images might appear on the rear side of subsequent prints. Solid image originals will cause offset image prints.

Originals

IJ If there is no margin or if there is a solid image area near the leading edge of the original, make at least a 5 mm, 0.2”, margin at the leading edge; otherwise, the paper might wrap around the drum or the paper exit pawl might become dirty and cause black lines on prints.

n If you use originals that have bold letters or solid images at the leading edges, you might get prints with dirty edges. In this case, insert the widest margin first, or raise the printing speed.

aIf you use paste-up originals, make sure that the pasted parts hold firmly to the base sheet. If the thickness of the paste-up originals is more than 0.2 mm, 2/250” and the space between the pasted parts is less than 2 mm, 2/25”, a shadow might appear on the print.

207

Page 212
Image 212
Ricoh VT3800 manual Print Paper, Originals