Ricoh VT3800 manual Outline Mode One Command Sheet

HOW TO USE IMAGE MAKE-UP MODE

Outline Mode (One Command Sheet)

Press the Make-upkey.

If you want to leave the Make-up mode at any time, press the Make- up key again.

Using the Number key, select the Outline mode (Fn2) for the designated area. (* See page 5.)

Press the Enter key.

If a Fn No. (Command number) was entered previously and is still in memory, press the Clear key.

The commands entered previously are stored in memory until the main switch is turned off or the Clear Modes key is pressed.

Press the Enter key again.

17