OPERATION
Erasing Center And Edge Margins
When printing from thick books, or similar originals, the binding margin at the center and the edges might appear on prints. To prevent this, follow the steps on the next page.
The 1 mm, 0.02” margins on all four sides of the original will be erased. The width of the margins will change depending on the reduction ratios.
Shadows near the book edge might not be erased completely.
If the shapes of the originals are as below, shadows might appear on the prints. In this case, make a master with the platen cover closed.
Shadow
1I
v
Scanning direction
If there is a line or solid image on the margin and you erase the center and the edges, the image might be erased as shown below. In this case, use the function described on page 38.
—
—
9–
—
i
Scanning direction
