
OPERATION
Printing From Several Originals At Once
Use the Auto Cycle key to process masters and make prints at one stroke.
nWhen you use the optional document feeder, it is not necessary to place originals one by one. All originals are fed and prints are completed after you press the Print Start key.
CI If you use the optional tape dispenser, the tape dispenser drops a strip of paper onto the top of the paper stack after the last page of each printing set is fed out to the paper delivery table. This marks the end of each printing
group.
Set the original face down on Elthe exposure glass or in the op-
tional document feeder.
oYou can set up to 20 originals into the optional 20 originals document feeder.
nYou can set up to 50 originals into the optional 50 originals document feeder.
Enter the number of prints re-
Elquired using the Number keys.
Press the Master Making key. ElCheck the image position of the
trial or proof print.
c1 If the image position is not correct, adjust it using the Image Position keys (= see page 21) or the side plate fine adjusting dial (* see page 22).
45