OPERATION
Press the Enter key. This Elstores the number of prints to
be made for the first original in memory 1.
5When the number of prints in each set is the same, it is not necessary to input the number of prints for each group in memory. Simply se- lect Auto Cycle mode and enter the desired number of prints once.
nWith the Number keys, enter
A
the number of prints for the second original.
Press the Enter key. This Hstores the number of prints to
be made for the second original in memory 2.
HI original.Repeat steps 4 and 5 for each
uThe number of prints for up to 25 originals can be stored.
Press the Enter key again. The
Elmemory returns to memory 1.
7If you store the number of prints for 25 originals, the memory number returns to 1. It is not necessary to press the Enter key.
51
