Ricoh VT3800 manual When one of the following Guidance display, Messages is displayed on

When one of the following

the guidance display:

Guidance Display

RE-ENTER COPY NUMBER MAXIMUM IS XXXX

RE-ENTER COPY NUMBER MINIMUM IS XXXX

200% MAXIMUM ENLARGEMENT

messages is displayed on

The maximum number of prints

that can be entered is specified by the Service Program mode. Change the number of prints.

The minimum number of prints

that can be entered is specified by the Service Program mode. Change the number of prints.

The maximum enlargement ratio that can be entered is 200Y0. If the entered reproduction ratio is over 200Y0, 200% will be se- lected.

50% MINIMUM

REDUCTION

SET COMMAND SHEETS

SET THE ORIGINALS

The minimum reduction ratio that

can be entered is 50’Yo. If the entered reduction ratio is under 50?4, 50?4 will be selected.

Make prints after you confirm whether there is an original or a command sheet on the exposure glass.

m

165