CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
SP No.
160
-170
Mode ~Function
Adjust the erase edges area for the following
sizes of originals. The adjustment value is (50 -
307 mm) x(50 -432 mm).
SP No. 160: A30r11’’xl7°
DDefault: metric version: 289 x416 mm
inch version: 271 x428 mm
Erase Margins
Adjustment Area
SP No. 161: B4 or 81@’x14”
aDefault: metric version: 249 x360 mm
inch version: 208 x352 mm
SP No. 162 A4 or 81@”x11”
aDefault: metric version: 202 x293 mm
inch version: 208 x275 mm
SP No. 163 A4 or 81/2”x11”
aDefault: metric version: 289 x206 mm
inch version: 271 x212 mm
SP No. 164 B5 or 51/2” x81/2”
nDefault: metric version: 174 x253 mm
inch version: 132 x212 mm
SP No. 165 B5 or 51/2” x81@
~Default: metric version: 249 x 178 mm
inch version: 208 x 136 mm
SP No. 166 A5 m
oDefault: metric version: 140 x206 mm
inch version: 50 x50 mm
SP No. 167 metric version: A5 CI
IJ Default: 202 x144 mm
SP No. 168 metric version: A6 D
CI Default: 97x 144 mm
SP No. 169 metric version: A6 u
DDefault: 140x 101 mm
SP No. 170 smaller than A6
aDefault: 92 x144 mm
138
OPTIONAL FUNCTION!
BMake your prints.
I
aWhen you want to make prints us-
ing another original, remove prints
from the bins. Then, repeat steps 3
through k$.