us 0 Press m at any time to cancel a transfer.

0After a transfer, the display returns to the application being used before the transfer procedure was begun.

0Received data is stored and appended to the existing data of the selected application. After a transfer with (-1 and ISEND), the data is also automatically assigned to the IN folder of the Filer application so that you can check it after transfer. It is therefore recommended that you always keep the IN folder empty. (See p. 204).

If a RAM card is installed, applications on it can also be selected to transfer data to or from. See p. 251.

In the Tel or User File applications, the contents of fields that are not set up in the receiving file cannot be transferred. Also, if the type of a field (text or picture) is different in the two units, it cannot be transferred.

No peripheral devices are required to transfer data via the infrared port. However, infrared transfers are easily affected by ambient conditions which may interfere with this type of transfer. Connecting the two units with the optional CE-315L cable will ensure a more reliable transfer. See p. 248.

Initial set-up

There is no special hardware set-up involved in infrared transfers. And if you only want to transfer single entries or single Filer folders using (GET) and (m) , there is no software set-up either: all you have to do is set up the units properly (step 4 below). For all other infrared transfers, follow the procedure below.

1.Press (&ii%@ and touch 1 PERIPHERALSI (or, on some models, press 12nd) [PERIPHERALS)) on both units to open the PERIPHERALS menu.

2.Select GLOBAL SETTINGS (only IQ-8900/8920) and then select SET UNIT TO UNIT PATH.

A submenu opens.

3.Select VIA INFRARED PORT.

245

Page 246
Image 246
Sharp IQ-8900, IQ-8920 manual Us 0 Press m at any time to cancel a transfer, Initial set-up