Sharp IQ-8900, IQ-8920 manual 233

Ils The unit does not have an automatic redial function when faxing. If the line is busy, “A line error has occured!” will be displayed and faxing will be terminated.

Making In step 3 above, you may want to make other changes to

otherthe fax number or type in another number altogether. To

changes do so, simply enter any number from the keypad (or

to the keyboard) and then touch -1. You can also use

number speed buttons to use predefined numbers or to add credit card codes in the dialing sequence (see Speed buttons later in this chapter).

First repeat steps 1 and 2 above.

For example, you may want to add a “9” prefix before the number to get an outside line from within a company phone system. To add a “9” to the number,

3.Touch 191 on the touch pad (or on the keyboard). The number will appear in the top line of the display.

4.Press It) on the keyboard. This adds a one-half second dialing pause.

5.Touch the displayed fax number. It will be added to the confirmation box after the “9,“. Note the fax number is adjusted if LOCAL or USE 1 + NUMBER is checked.’ Note that the LOCAL selection may not work correctly in some areas.

6.Touch ml . The unit will now dial the number in the confirmation box and begin faxing automatically.

Sending In some instances you may want to dial a fax number

a faxmanually, allowing you to hear the dial tone and other

(Manual dialing sounds. Dialing manually with the unit is just like

dialing) pressing SPEAKER on a conventional fax machine and then dialing. Note that you must have a connection with the receiving FAX machine and hear a fax tone before touching -1 .

To send a FAX manually,

233