![](/images/new-backgrounds/1313166/31316641x1.webp)
B MPAA RATING SET UP
Follow steps 1 to 3 in the
4Select your desired item
Press [K / L] to point to your | PG | [VIEW] | ||
|
| G | [VIEW] | |
desired item, then hit [ENTER] to | [VIEW] | |||
B R | [BLOCK] | |||
select [BLOCK] or [VIEW]. | [BLOCK] | |||
X | [BLOCK] | |||
|
| |||
|
|
| ||
Selection | Rating Category Explanations |
| ||
G | General Audience |
|
| |
PG | Parental Guidance suggested. |
| ||
Unsuitable for children under 13 |
|
RRestricted; under 17 requires accompa- nying parent or adult guardian
XMature audience only
•When you select a rating and set it to [BLOCK], the higher ratings will be blocked automatically. The lower ratings will be available for viewing.
•When you set the lowest rating to [VIEW], all other ratings will automatically be available for viewing.
5Exit the
Hit [SETUP] to exit the menu.
C CHANGE ACCESS CODE
Follow steps 1 to 3 in the
4 Enter New code
Press the Number buttons to enter your desired access code in the
“NEW CODE” space, then enter the same code in the “CONFIRM
CODE” space. When completed, the menu will return to
•Make sure you enter exactly the same new code in the “CONFIRM CODE” space as one in the “NEW CODE” space. If they are different, the “NEW CODE” space is cleared for redoing.
5Exit the
Hit [SETUP] to exit the menu.
NOTE:
•Your personal access code will be erased and will return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you have forgotten the code, unplug the power cord for 10 seconds to restore the access code to 0000.
MENU LANGUAGE
|
| TV/VCR |
|
|
|
1 Select “LANGUAGE” | - TV/VCR SETUP - | |
Hit [SETUP]. | TIMER PROGRAMMING | |
SETTING CLOCK | ||
Press [K / L] to point to “LAN- | CHANNEL SET UP | |
USER’S SET UP | ||
GUAGE”. | B LANGUAGE [ENGLISH] | |
ZERO RETURN | ||
| CAPTION [OFF] | |
| TIME SEARCH | |
| INDEX SEARCH |
2Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Hit [ENTER] repeatedly to select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French.
3Exit the Language mode
Hit [SETUP] to exit the menu.
NOTES:
•This function effects only the language on the screen menu and not the audio source.
•If for some reason the menu is in Spanish or French, hit [SETUP], press [K / L] to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then hit [ENTER] repeatedly to select desired language, then hit [SETUP].
- 21 - | EN |