Polycom 3725-76302-001O Edit Conference Template Dialog Box, Field Description Common Settings

Conference Manager Configuration

Field	Description
Conference custom layout	Enables the Conference layout desired setting, where you can select the
	number and arrangement of video frames by clicking the image.
Conference layout desired	With Conference custom layout enabled, allows you to select the number and
	arrangement of video frames by clicking the image. Once a layout is chosen,
	a small representation of it appears here. See Select Layout Dialog Box on
	page 216.

See also:

Conference Templates on page 190

Select Layout Dialog Box on page 216

Conference Templates Procedures on page 216

Edit Conference Template Dialog Box

Lets you edit a conference template. The following table describes the fields in the dialog box. The Common Settings section applies to all MCUs. The Cisco Codian section appears only if the system is licensed to use Cisco Codian MCUs, and its settings apply only if a Codian MCU is selected for the call. The other sections apply only if a Polycom RealPresence Collaboration Server or RMX MCU is selected.

Field Description

Common Settings

Name

Description

A meaningful name for the template (up to 50 characters).

A brief description of the conference template (up to 50 characters).

RMX General Settings

RMX Profile Settings	See Two Types of Templates on page 190.
Use existing profile	Links this template to the RMX profile selected in the list below.
	For most purposes, we recommend leaving this box unchecked and
	specifying conference properties directly. See Conference Templates on
	page 190.
RMX profile name	Identifies the profile to which this template is linked. The list contains the
	names of all the profiles available on the currently connected MCUs. If a
	profile is only available on some of the connected MCUs, its entry shows how
	many of the MCUs have that profile (for instance, 2 of 3).
	The system will put conferences using this template on the least used MCU
	that has this profile. If there are none, it selects the least-used MCU and either
	uses the Codian-specific settings (if it selected a Cisco Codian MCU) or falls
	back to the default conference template (if it selected a Polycom MCU).

Polycom, Inc. 206