Polycom 3725-76302-001O manual Edit Subnet Dialog Box, Field

Site Topology

Note: Subnets and Sites

You can assign a subnet to only one site.

The following table describes the fields in the dialog box.

Field	Description
Name	The name of the subnet. Required and must be unique.
IP address	The IP address of the subnet.
Subnet mask length	The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
	leading 1 bits in the routing prefix mask). This value, together with the IP
	Address, defines the subnet.
	For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
	of 255.255.255.0. A value of 16 is equivalent to specifying a dotted-quad
	subnet mask of 255.255.0.0.
Max bandwidth (Mbps)	The total bandwidth limit for voice and video calls. If not specified, the site limit
	applies.
Max bit rate (kbps)	The per-call bit rate limit for voice and video calls. If not specified, the site limit
	applies.
	Note: Bit rate is not the same as bandwidth. Since the bit rate applies in both
	directions and there is overhead, the actual bandwidth consumed is about 2.5
	times the bit rate selected.
	When you specify both the bandwidth and bit rate limits, the dialog box shows
	you how many calls at that bit rate the specified bandwidth supports.

See also:

Add Site Dialog Box on page 282

Edit Site Dialog Box on page 285

Site Topology Configuration Procedures on page 299

Edit Subnet Dialog Box

Lets you edit a subnet associated with a site.

Note: Subnets and Sites

You can assign a subnet to only one site.

The following table describes the fields in the dialog box.

Field

Name

IP address

Description

The name of the subnet. Required and must be unique.

The IP address of the subnet.

Polycom, Inc. 290