Polycom 3725-76302-001O manual Conference Manager Configuration, Conference Settings

Conference Manager Configuration

This chapter describes the following Polycom® RealPresence® Distributed Media Application™ (DMA®)

7000 system configuration topics related to the Conference Manager functionality:

●Conference Settings

●Conference Templates

●IVR Prompt Sets

●Shared Number Dialing

Conference Settings

On the Conference Settings page, you can define the default class of service and bit rate limits, a dialing prefix, and various default conference properties for the Polycom RealPresence DMA system. If the system is integrated with a Microsoft® Lync 2013 environment, you can also configure system-wide default settings related to Presence Publishing for Polycom conference contacts. The table below describes the properties on this page.

Note: Class of Service Scope

The default class of service, maximum bit rate, and minimum downspeed rate are the default values for point-to-point calls as well as conference (VMR) calls. But when a device calls a conference room, the class of service of the conference room applies to the call, not the class of service of the group, user, or device.

Field	Description
Default class of service	The class of service assigned to a user or endpoint if the class of service isn’t
	specified at the endpoint, user, or group level.
	Note: When a device calls a conference room (VMR), the class of service of
	the conference room applies to the call, not the class of service of the group,
	user, or device.
Default maximum bit rate (kbps)	The maximum bit rate for a call if the maximum bit rate for the user or endpoint
	isn’t specified at the endpoint, user, or group level.
Default minimum downspeed	The minimum bit rate to which a call can be reduced (downspeeded) if the
(kbps)	minimum downspeed for the user or endpoint isn’t specified at the endpoint,
	user, or group level.

Polycom, Inc. 185