Polycom 3725-76302-001O manual To create a new backup file, To upload a backup file

5Click Close.

To create a new backup file

1Go to Maintenance > Backup and Restore.

2Verify that the oldest backup file listed is one you don’t want to keep or have already downloaded.

Only ten files are saved. Creating a new backup will delete the oldest file (unless there are fewer than ten).

3In the Actions list, click Create New (Full) to create a full backup or Create New (Config Only) to create a configuration-only backup (no transaction data).

A confirmation dialog tells you the backup archive was created. For a full backup, this may take some time.

4Click OK.

To upload a backup file

1Go to Maintenance > Backup and Restore.

2Verify that the oldest backup file listed is one you don’t want to keep or have already downloaded.

Only ten files are saved. Uploading a backup will delete the oldest file (unless there are fewer than ten).

3In the Actions list, click Upload.

4Choose a backup file to upload and click Open.

The File Upload dialog box indicates when the upload is complete.

5Click Close.

The system asks if you want to restore now from the backup file you just uploaded.

6If you don’t want to restore (and restart the system) now, click Manually Later. When you’re ready to restore, use the procedure that follows this one.

7To restore now, make sure you meet the criteria in the first two steps of the next procedure, and click Now.

The Confirm Restore dialog box appears.

8Read the warning, make sure that you want to continue, select which data you want to restore, and click OK.

Caution: Restoring Config-Only Backups

Restoring feature and system configuration, but not network configuration (or vice versa) will result in invalid primary or backup cluster assignments for some territories. After the restore operation is complete, go to Network > Site Topology > Territories and assign primary and backup clusters to the affected territories.

After a short delay, a dialog box informs you that the system is going to be restored and you’ll be logged out.

Polycom, Inc. 377