Alert 1105

<alerting-cluster>: Primary cluster <p-cluster> and backup cluster <b-cluster> are not reachable. Territory <territory> may not be functioning.

The cluster from which the alert originated is unable to communicate with the specified territory’s primary and backup clusters.

This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is once again able to communicate with the clusters in question.

If this alert reoccurs frequently but quickly goes away, that suggests intermittent spurious network problems. If it persists for more than about 15-30 seconds, it may indicate serious network problems. It’s also possible that someone shut both clusters down, or shut down one and the other then failed, or both failed (unlikely).

Click the link to go to the Territories page. To enable conferencing to continue in the territory (at diminished capacity), assign it to some other cluster.

See also:

Alerts on page 342

Alert 1106

<alerting-cluster>: Cluster <cluster> is not reachable. Territory <territory> may not be functioning.

The cluster from which the alert originated is unable to communicate with the specified territory’s primary cluster, and there is no backup cluster.

This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is once again able to communicate with the cluster in question.

If this alert reoccurs frequently but quickly goes away, that suggests intermittent spurious network problems. If it persists for more than about 15-30 seconds, it may indicate serious network problems. It’s also possible that someone shut the cluster down or that it failed.

Click the link to go to the Territories page. To enable conferencing to continue in the territory (at diminished capacity), assign it to some other cluster.

We recommend assigning a backup cluster for each territory. See also:

Alerts on page 342

Alert 1107

<alerting-cluster>: Primary cluster <p-cluster> associated with territory <territory> is not reachable. But backup cluster <b-cluster> is reachable.

The cluster from which the alert originated is unable to communicate with the specified territory’s primary cluster, but can communicate with the backup cluster.

This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is once again able to communicate with the cluster in question.

Polycom, Inc.

344

Page 344
Image 344
Polycom 3725-76302-001O manual Polycom, Inc 344