Polycom 3725-76302-001O Site Topology Configuration Procedures, Go to Network Site Topology Sites

Site Topology

Site Topology Configuration Procedures

To configure your site topology in the RealPresence DMA system

1Go to Network > Site Topology > Sites.

Initially, the list of sites contains only an entry named Internet/VPN, which can’t be edited.

2For each site in your network topology, do the following: a In the Actions list, click Add.

b In the Add Site dialog box, complete the General Info section. See Add Site Dialog Box on page 282.

c To enable IP calls to/from the site, complete the ISDN Number Assignment, H.323 Routing and/or SIP Routing sections.

d In the Subnets section, specify the subnet or subnets that make up the site. See Add Subnet Dialog Box on page 289.

e Click OK.

3Go to Network > Site Topology > Territories.

The list of territories contains an entry named Default RealPresence DMA Territory. It’s assigned to this Polycom RealPresence DMA system cluster. You can edit this entry, including changing its name and assigning sites to it.

4Edit the Default RealPresence DMA Territory entry:

a Select the entry and, in the Actions list, click Edit. The Edit Territory dialog box appears.

b In the Territory Info section, change the name and description for this territory if desired. Assign a primary and backup cluster for the territory, and elect whether to host conference rooms in this territory (the primary and backup cluster must be licensed for this capability).

c In the Associated Sites section, add all the sites to the territory. See Edit Territory Dialog Box on page 296.

d Click OK.

5Add other territories by clicking Add in the Actions list and completing the same settings in the Add Territory dialog box.

6Go to Network > Site Topology > Site Links, and for each direct link between sites, do the following:

a In the Actions list, click Add.

b In the Add Site Link dialog box, define the link. See Add Site Link Dialog Box on page 292. c Click OK.

7Go to Network > Site Topology > Network Clouds, and for each MPLS network cloud in your network topology, do the following:

a In the Actions list, click Add.

The Add Network Cloud dialog box appears.

bIn the Cloud Info section, enter a name and description for the cloud.

cIn the Linked Sites section, display the sites you defined. See Add Network Cloud Dialog Box on page 297.

Polycom, Inc. 299