Polycom 3725-76302-001O manual Edit Notification Agent Dialog Box

Polycom RealPresence DMA System SNMP Support

Field	Description
Port	The port that the RealPresence DMA system uses to send notifications. Default
	port–162
Notification type	The type of notification that this agent sends to the notification receiver:
	• Inform–The agent sends an unsolicited message to a notification receiver and
	expects or requires the receiver to respond with a confirmation message.
	• Trap–The agent sends an unsolicited message to a notification receiver and does
	not expect or require a confirmation message.
SNMP version	The version of SNMP used for this agent (v2c or v3).
Security user	For SNMP v3, the user name of the security user authorized to actively retrieve
	SNMP data.

3Click OK.

The agent appears in the Notification Agents list.

Edit Notification Agent Dialog Box

The Edit Notification Agent dialog box lets you enable, disable, or modify an SNMP notification agent. The following table describes the fields in the dialog box.

Setting	Description
Enable agent	Enables the notification agent defined below.
	Clearing this check box lets you stop using this agent without deleting it.
Transport	The transport protocol for SNMP communications to the host receiver (TCP or
	UDP). See SNMP Overview on page 419.
Address	The IP address of the host receiver (the SNMP manager to whom this agent
	sends notifications).
Port	Specify the port that the DMA system will use to send notifications. By default,
	the DMA system uses port 162.
Notification type	The type of notification that this agent sends to the notification receiver:
	• Inform — The agent sends an unsolicited message to a notification receiver
	and expects/requires the receiver to respond with a confirmation message.
	Introduced with SNMP version 2c, this option is not supported by network
	management systems that only support SNMP version 1.
	• Trap—The agent sends an unsolicited message to a notification receiver
	and does not expect/require a confirmation message.
SNMP version	The version of SNMP supported (v2c or v3). See SNMP Versions on
	page 420.
Security user	For SNMPv3, the security user to receive notifications from this agent. The list
	contains the names of the security users in the Notification Users list.

Polycom, Inc. 424