Polycom 3725-76302-001O Edit External Gatekeeper Dialog Box, Authentication Mode, Postliminary

Device Management

Column	Description
Prefer routed	If selected (the default), the system forces all calls to this gatekeeper to routed
	mode.
	This setting must be enabled to avoid interoperability issues with Polycom
	CMA and Avaya gatekeepers, and possibly others as well.
Authentication Mode	In this section, you can configure the system to send its H.235 credentials
	when it sends address resolution requests to that gatekeeper.
Enabled	Clearing this check box lets you stop sending H.235 credentials to the
	external gatekeeper without deleting them.
Name	The H.235 name of the Polycom RealPresence DMA system.
Password	The H.235 password for the Polycom RealPresence DMA system.
Confirm password
Algorithm	Select the encryption algorithm for H.235 authentication.
LRQ test	Click to test the configuration by sending an LRQ message to the external
	gatekeeper.
Postliminary	A postliminary is an executable script, written in the Javascript language, that
	defines dial string transformations to be applied before querying the external
	gatekeeper.

Enabled

Script

Lets you turn a postliminary on or off without deleting it.

Type (or paste) the postliminary script you want to apply. Then click Debug this script to open the Script Debugging Dialog Box for Preliminaries/Postliminaries and test the script with various variables.

See also:

External Gatekeeper on page 101

Script Debugging Dialog Box for Preliminaries/Postliminaries on page 254 Device Authentication on page 261

Edit External Gatekeeper Dialog Box

The following table describes the fields in the Edit External Gatekeeper dialog box.

Column Description

External Gatekeeper

Enabled

Name

Description

Address

Clearing this check box lets you stop using an external gatekeeper without deleting it.

Gatekeeper name.

The text description displayed in the External Gatekeepers list.

Host name or IP address of the gatekeeper.

Polycom, Inc. 103