Polycom 3725-76302-001O Edit External SIP Peer Dialog Box, Field Description External SIP Peer

Device Management

See also:

External SIP Peer on page 105

SIP Peer Postliminary Output Format Options on page 114 Device Authentication on page 261

Add Authentication Dialog Box on page 117 Edit Authentication Dialog Box on page 118

Add Outbound Registration Dialog Box on page 118 Edit Outbound Registration Dialog Box on page 119

Script Debugging Dialog Box for Preliminaries/Postliminaries on page 254

Edit External SIP Peer Dialog Box

The following table describes the fields in the Edit External SIP Peer dialog box.

Field	Description
External SIP Peer
Enabled	Clearing this check box lets you stop using an external SIP peer server
	without deleting it.
Name	Peer server name or number. Must be unique among SIP peers.
Description	The text description displayed in the External SIP Peer list.
Type	For a Microsoft Office Communications Server, Lync Server 2010, or Lync
	Server 2013, select Microsoft. Otherwise, select Other.
	Selecting Microsoft implicitly adds the Destination network value to the
	Domain List (if not already there) and automatically selects the Postliminary
	settings that are correct for most deployments in Microsoft environments, but
	you can modify them if necessary.
Next hop address	Fully qualified domain name (FQDN), host name, or IP address of the peer
	server.
	If you specify a domain/host name, the system routes calls to this peer by
	using DNS to resolve the address. The DNS server that the system uses must
	contain the required records (NAPTR, SRV, and/or A/AAAA).
	Note: If you are configuring a Lync 2013 SIP Peer, the Next hop address
	should be the FQDN or IP address of the Lync Pool, not an individual Lync
	server within a pool.
Destination network	Host name, FQDN, or network domain label of the peer server, with or without
	port and URL parameters.
	If specified, this value by default replaces the non-user portion of a URL (after
	the @ symbol) of the To header and Request-URI for forwarded messages,
	and just the Request-URI for REGISTER messages.
	If Type is set to Microsoft, this field is required, is used for the peer’s domain,
	and is implicitly added to the Domain List (if not already there).

Polycom, Inc. 110