Polycom 3725-76302-001O manual Edit Group Dialog Box, See Conference Settings on

Users and Groups

See also:

Users on page 303

Groups on page 325

Enterprise Groups Procedures on page 329

Edit Group Dialog Box

The following table describes the fields in the Edit Group dialog box.

Field	Description
Class of service	Select to assign the group a class of service other than the system’s default
	(see Conference Settings on page 185).
	Note: When a device calls a conference room (VMR), the class of service of
	the conference room applies to the call, not the class of service of the group,
	user, or device.
Maximum bit rate (kbps)	If Class of service is selected, specifies the maximum bit rate for the group.
Minimum downspeed bit rate	If Class of service is selected, specifies the minimum bit rate to which the
(kbps)	group’s calls can be reduced (downspeeded).
Conference template	Select to assign a template other than the system’s default (see Conference
	Settings on page 185).
	The template assignment can be made at the conference room level, AD
	group level, or system default level. It defines the conference properties (or
	links to the Polycom MCU profile) used for its conferences. See Conference
	Templates on page 190.
MCU pool order	Select to assign the group an MCU pool order other than the system’s default
	(see Conference Settings on page 185).
	The pool order assignment can be made at the conference room level, AD
	group level, or system default level. It’s used to determine which MCU hosts a
	conference. See MCU Pool Orders on page 145.
Territory	Select to assign the group’s conference rooms to a territory other than the
	system’s default (see Conference Settings on page 185).
	A conference room’s territory assignment determines which RealPresence
	DMA cluster hosts the conference (the primary cluster for the territory, or its
	backup cluster if necessary). The assignment can be made at the conference
	room level, user level, AD group level, or system default level.
	Note: If a user belongs to more than one group, that user’s territory setting is
	inherited from the lexically first group (but doesn’t change if the group is
	renamed). To be certain that a specific user’s conference rooms are assign to
	a specific territory, assign that territory directly to the user. See Edit User
	Dialog Box on page 307.

Polycom, Inc. 327