Polycom 3725-76302-001O manual RMX Audio Settings, RMX Skins

Conference Manager Configuration

Field	Description
Telepresence mode (v6)	Support for telepresence conference rooms joining the conference:
	• Auto (default) — A conference is automatically put into telepresence mode
	when a telepresence endpoint (RPX, TPX, ATX, or OTX) joins.
	• On— Telepresence mode is on, regardless of whether a telepresence
	endpoint is present.
	• Off— Telepresence mode is off, regardless of whether a telepresence
	endpoint is present.
	We recommend always using Auto. Available only on v6.0 and newer
	Polycom MCUs that are licensed for telepresence mode. For information on
	Polycom MCU licensing and activation, refer to the MCU’s Getting Started
	Guide.
	Note: The system flag ITP_CERTIFICATION must be set to YES. See the
	information about system flags in the MCU’s Administrator’s Guide.
Telepresence layout mode (v6)	Layout choices for telepresence conferences:
	• Manual — Layout is controlled manually by a conference operator using
	the Multipoint Layout Application (MLA) interface.
	• Continuous Presence — Tells the MLA to generate a multipoint view
	(standard or custom).
	• Room Switch — Tells the MLA to use Voice Activated Room Switching
	(VARS). The speaker’s site is the only one seen by others.
	Not available if Telepresence mode is No. See the Polycom Multipoint
	Layout Application User Guide for more information about layouts.
RMX Audio Settings
Echo suppression	Enables the MCU to detect and suppress echo.
	Available only on MCUs with MPM+ or MPMx cards.
Keyboard suppression	Enables the MCU to detect and suppress keyboard noise.
	Available only on MCUs with MPM+ or MPMx cards.
Audio clarity (v7)	Improves the voice quality in conference of a PSTN endpoint.
	Available only on v7 and newer Polycom MCUs.
Mute participants except lecturer	Enables the MCU to automatically mute all participants except the lecturer
	upon connection to the conference.
Auto mute noisy endpoints (not	Enables the MCU to automatically detect and mute endpoints that have a
applicable to MPM+)	noisy audio channel.
	Not available on MCUs with an MPM+ card.
Speaker change threshold	Allows you to configure the amount of time the MCU requires a participant to
(seconds) (MPMx only)	speak continuously until becoming the speaker.
	The default Auto setting is 3 seconds.
RMX Skins	Lets you choose the display appearance (skin) for conferences using this
	template.
	Not available if Telepresence mode is Yes or Video switching is enabled.

Polycom, Inc. 203