Field

Description

 

 

endTime

YYYY-MM-DDTHH:MM:SS.FFF[+-Z][HH:MM]

 

(ISO 8601 syntax, where FFF is milliseconds and Z is zero offset)

 

This is when the last participant left the conference.

 

 

userID

Conference room (VMR) owner, shown as:

 

 

domain\user

 

Domain is LOCAL for non-AD users.

 

If this is a Lync conference, this field is empty.

 

 

roomID

Conference room (VMR) number or Lync conference ID.

 

 

partCount

Maximum number of concurrent calls in the conference (high water mark).

 

Doesn’t include audio-only IVR dial-outs or participants dialed directly into or

 

out from the MCU without going through the RealPresence DMA sytem.

 

The following are counted as a single participant:

 

A Polycom or Cisco immersive telepresence room using Cisco TIP

 

 

signaling.

 

A Polycom ITP room using SIP signaling and the prescribed naming

 

 

convention (see Naming ITP Systems Properly for Recognition by the

 

 

Polycom RealPresence DMA System on page 95).

 

 

classOfService

Class of service for the call:

 

Gold

 

Silver

 

Bronze

 

 

userDataA

The value from the User pass-through to CDR field of the user associated

 

with the conference room (VMR) (see Edit User Dialog Box on page 307).

 

 

userDataB

The value from the Conference room pass-through to CDR field of the

 

conference room (VMR) (see Edit Conference Room Dialog Box on

 

page 317).

 

 

userDataC

The conference ID provided via the API, if any.

 

 

maxResourcesUsed

The maximum number of video and voice ports used for the conference,

 

reported as follows:

 

 

video: <video port count> voice: <voice port count>

 

Available only for conferences on a RealPresence Collaboration Server or

 

RMX MCU that provides this information.

 

Note: Voice calls may use video ports if voice ports aren’t available.

 

Note: The RealPresence DMA system reports port numbers based on

 

resource usage for CIF calls. Version 8.1 and later Polycom MCUs report port

 

numbers based on resource usage for HD720p30 calls. In general, 3 CIF = 1

 

HD720p30, but it varies depending on bridge/card type and other factors.

 

See your Polycom RealPresence Collaboration Server or RMX system

 

documentation for more detailed information about resource usage.

 

 

 

Polycom, Inc.

406

Page 406
Image 406
Polycom 3725-76302-001O manual Polycom RealPresence DMA System on, Value from the Conference room pass-through to CDR field