Polycom 3725-76302-001O manual Site-to-Site Exclusions, Add Site-to-Site Exclusion Wizard

Site Topology

Field	Description
Name	A meaningful name for the link (up to 128 characters).
Description	A brief description of the link (up to 200 characters).
From site	The originating site of the link (view only).
To site	The destination site of the link (view only).
Max bandwidth (Mbps)	The total bandwidth limit for voice and video calls, which you set at the
	gateway or router.
Max bit rate (kbps)	The per-call bit rate limit for voice and video calls, which you set at the
	gateway or router.

See also:

About Site Topology on page 278

Site Links on page 291

Site Topology Configuration Procedures on page 299

Site-to-Site Exclusions

The Site-to-Site Exclusions page contains a list of the site-to-site connections that the site topology doesn’t permit a call or session to use.

If the system is integrated with a Polycom RealPresence Resource Manager or CMA system, it receives this information from that system, and this page is read-only. If not, you can define exclusions.

The commands in the Actions list let you add a site-to-site exclusion and delete existing exclusions. The following table describes the fields in the list.

Column

From Site

To Site

Description

Name of one of the two sites connected by the excluded link.

Name of the other site.

See also:

About Site Topology on page 278

Add Site-to-Site Exclusion Wizard on page 293

Site Topology Configuration Procedures on page 299

Add Site-to-Site Exclusion Wizard

Lets you define a new site-to-site exclusion in the Polycom RealPresence DMA system’s site topology.

To add a site-to-site exclusion

1 Go to Network > Site Topology > Site-to-Site Exclusions.

Polycom, Inc. 293