Polycom 3725-76302-001O manual Polycom, Inc 212

Conference Manager Configuration

Field	Description
Content protocol	Content channel protocol options:
	•	Use H.263.
	• Use H.264 if available, otherwise use H.263.
	• Use H.264 cascade and SVC optimized.
	•	Use H.264 HD.
Content resolution	Specifies the resolution of the content channel for the conference and
	cascade link.
	Available only when Content protocol is set to H.264 cascade and SVC
	optimized.
H.264 high profile	Enables the H.264 High Profile set of capabilities for the content channel,
	which enables additional compression efficiency and allows for higher
	resolutions to use the same bandwidth.
Send content to legacy	Enables endpoints that don’t support H.239 to receive the Content channel
endpoints (MPM+ and	over the video (People) channel.
MPMx only)	Available only on MCUs with MPM+ and MPMx cards. Not available if Video
	switching or Same layout is selected, or if Telepresence mode is Yes.
RMX Video Settings
Presentation mode	Enables a conference to change to lecture mode when the current speaker
	speaks for 30 seconds. When another participant starts talking, it returns to
	the previous video layout.
	Not available if Video switching or Same layout is selected, or if
	Telepresence mode is Yes.
Same layout	Forces the selected layout on all participants. Personal selection of the video
	layout is disabled.
	Not available if Presentation mode or Video switching is selected, or if
	Telepresence mode is Yes.
Lecturer view switching	When in lecture mode, enables the lecturer’s view to automatically switch
	among participants (if the number exceeds the number of windows in the
	layout) while the lecturer is talking.
	Not available if Same layout is selected or Telepresence mode is Yes.
Auto layout	Lets the system select the video layout based on the number of participants in
	conference. Clear the check box to select a specific layout (below).
	Not available if Video switching is selected or Telepresence mode is Yes.
Layout	With Auto layout deselected, this opens the Select Layout dialog box, where
	you can select the number and arrangement of video frames. Once a layout is
	chosen, a small representation of it appears here. See Select Layout Dialog
	Box on page 216.
	Not available if Video switching is selected.

Polycom, Inc. 212