Polycom 3725-76302-001O manual Polycom, Inc 319

Users and Groups

Field	Description
Resource priority	In an Assured Services SIP (AS-SIP) environment, a Local Session Controller (LSC)
namespace	can provide priority-based precedence and preemption services to ensure that the
	most important calls get through. If your organization has implemented such a
	resource prioritization mechanism and you want to assign this conference room a
	priority value different from the system’s default (see Conference Settings on
	page 185), set this to the namespace being used for resource priority values. If the
	namespace being used isn’t listed, select Custom and enter the name in the box
	below the list.
Resource priority value	If the RealPresence DMA system is deployed in an AS-SIP environment with a
	resource prioritization mechanism and Local Session Controller (LSC), set this to the
	priority value to assign to conferences using this conference room. If using a custom
	namespace, enter the value in the box below the list.
	The string namespace:value is used in the SIP Resource-Priority header of
	outbound calls from this conference room and recorded in the conference property
	changes.
	For inbound calls to this conference room:
	• If the INVITE message contains a resource priority value, the RealPresence DMA
	system passes that value to the MCU.
	• If the INVITE message doesn’t contain a resource priority value, the
	RealPresence DMA system provides the value assigned here to the MCU on
	behalf of the endpoint.
	In either case, the resource priority value is recorded in the call property changes.
Presence	In a Microsoft® Lync 2013 environment, you can configure presence publishing (the
	publishing of VMR status to a Lync 2013 client contact list) for each VMR. Enable
	this check box to override the system-wide default presence publishing settings
	defined on the Admin > Conference Manager > Conference Settings page.
	Note: This property is visible only if the Publish presence for Polycom conference
	contacts check box is enabled on the Admin > Conference Manager >
	Conference Settings page.
	Depending on the settings of the Publish presence for Polycom conference
	contacts and Create Polycom conference contacts check boxes on the Admin >
	Conference Manager > Conference Settings page, there are two modes of
	operation for this field:
	• When Publish presence for Polycom conference contacts is checked and
	Create Polycom conference contacts is unchecked, the following options are
	displayed:
	 Publish presence
	 Do not publish presence
	These options control whether the RealPresence DMA system will publish presence
	status for this Polycom conference contact.
	• When both Publish presence for Polycom conference contacts and Create
	Polycom conference contacts are checked, the following options are displayed:
	 Create contact and publish presence
	 Do not create contact or publish presence
	These options control whether the RealPresence DMA system will create an Active
	Directory contact resource for and publish presence for this Polycom conference
	contact.
Polycom, Inc.	319