Polycom 3725-76302-001O manual Edit Simplified Isdn Gateway Dialing Prefix Dialog Box

Call Server Configuration

Edit Simplified ISDN Gateway Dialing Prefix Dialog Box

The Edit Simplified ISDN Gateway Dialing Prefix dialog box lets you edit a prefix-driven simplified ISDN gateway dialing service.

Note: ISDN Gateway vs. H.323<->SIP Gateway

This feature is not related to the Polycom RealPresence DMA system’s built-in H.323<->SIP gateway. Simplified ISDN gateway dialing is for routing calls to H.320 or PSTN protocol gateways.

This feature isn’t supported for calls from SIP endpoints, but SIP endpoints can make ISDN gateway calls by directly calling an MCU/gateway using its direct dial-in prefix (see Edit MCU Dialog Box on page 133).

The following table describes the fields in the dialog box.

Column	Description
Name	A display name for this service.
Description	Brief description of the service.
Enabled	Clearing this check box lets you turn off the service without deleting it.
Simplified ISDN dialing prefix	The dial string prefix(es) assigned to this service.
	Enter a single prefix (44), a range of prefixes (44-47), multiple prefixes
	separated by commas (44,46), or a combination (41, 44-47, 49).
	If your dial plan uses the Dial services by prefix dial rule (in the default dial
	plan) to route calls to services, all dial strings beginning with an assigned
	prefix are forwarded to this service for resolution.
Use all ISDN gateways	Indicates whether this service applies to all available gateways or only those
	selected below.
Available ISDN gateways	Lists the gateways that have at least one session profile specifying an H.320
	or PSTN protocol. See Edit MCU Dialog Box on page 133.
Selected ISDN gateways	Lists the selected gateways. The arrow buttons move gateways from one list
	to the other.

See also:

Call Server Configuration on page 233

Prefix Service on page 271

Edit Vertical Service Code Dialog Box

The Edit Vertical Service Code dialog box lets you edit a call forwarding or hunt group service invoked when callers dial the vertical service code (VSC) for that service followed by the alias. These services are included on the Prefix Service page and can’t be deleted. But you can disable them or change their names, descriptions, or VSCs (shown in the Prefix Range column of the Prefix Service page). If you change the VSCs, be sure to inform users of the change.

The following table describes the fields in the dialog box.

Polycom, Inc. 273