Honeywell HRHD 410 manual Config Configuration Menu, Config Menu

Configuration

Note The Admin and User passwords are composed of up to eight digits using the camera buttons. The default User password is 1234, and Admin password is 4321.

Caution Write down the new password and save it in a secure place. If the password is forgotten, the unit must be reset using the Factory Reset Button and all data settings will be lost.

3.To lock front panel buttons, highlight Key-Lock On and then press # . After the buttons are locked, pressing any front panel button will cause a password screen to display. You will need to enter the correct password to unlock the keys. The Key Lock password is 4231. The Administrator and User password also can be used to unlock the keys.

4.To save your changes, highlight OK and then press # . Select Cancel to exit the screen without saving the changes.

Config (Configuration) Menu

Use the Config menu (MENU ➤ Config) to perform functions such as:

•Switch between Quick Setup and Normal Setup

•Copy video clips

•Load default setup

•Clear all data

Figure 3-56 Config Menu

Rev 3.01	71	Document 900.0315
		10/05