Installation
Note The Loop BNC connectors are auto terminated. Do not connect a cable to the Loop BNC unless it is connected to another terminated device because it will cause poor quality video.
Connecting Audio
Note It is your responsibility to determine if local laws and regulations permit recording audio.
Figure 2-4 Audio In and Out Connectors
AUDIO IN 1 | AUDIO IN 2 | AUDIO IN 3 | AUDIO IN 4 | AUDIO OUT |
Your DVR can record audio.
1.Connect the audio source to Audio In.
2.Connect Audio Out to your amplifier.
Note The DVR does not have amplified audio output, so you need a speaker with an amplifier. The audio input must be from an amplified source.
Rev 3.01 | 7 | Document 900.0315 |
|
| 10/05 |
