Configuration

LAN — ADSL (PPPoE)

Select ADSL (PPPoE) from the Type box on the LAN Setup screen to set up the ADSL network.

Figure 3-50 LAN (ADSL) Setup Screen

1.Highlight the box beside ID and then press # .to display a virtual keyboard. Enter the ID for an ADSL connection.

2.Highlight the box beside Password and then press # .to use the virtual keyboard to enter the password for an ADSL connection.

Note Entering the ID and Password and highlighting OK reads the current IP Address of the DVR configured by the ADSL network.

Note If the DVR is configured for DHCP or an ADSL network, the IP Address of the DVR might change whenever the unit is turned on.

Rev 3.01

63

Document 900.0315

 

 

10/05

Page 81
Image 81
Honeywell HRHD 410 manual LAN Adsl PPPoE