Honeywell HRHD 410 manual Main Monitoring Setup Screen

Configuration

5.Highlight the box beside Left/Right Margin and then press # to adjust the left and right margins. The margins can be set from 1 to 24.

6.Highlight the box beside Top/Bottom Margin and then press # to adjust the top and bottom margins. The margins can be set from 1 to 24.

7.Highlight the box beside Text-Inand then press # to toggle the text-in data display On and Off.

8.If you want to read text input strings displayed on the screen easily and clearly,

turn On Text-In Background color. Highlight the box beside Text-In Background color and then press # to toggle between On and Off.

Main Monitoring Setup Screen

Use the Main Monitoring Setup screen (MENU ➤ Display ➤ Main Monitoring) to adjust the display dwell time for each camera displayed on the main monitor. You can also set the video from the event-detected cameras to be displayed on the main monitor during the preset dwell time.

Figure 3-45 Main Monitoring Setup Screen

1.Highlight the box beside Sequence Dwell Time and then press # . You can adjust the sequence dwell time from 3 to 60 seconds.

Note The DVR does not sequence a camera experiencing video loss.

2. Highlight the box beside Event Monitoring and then press # to toggle between On and Off. When it is On, the video of the lowest camera number among cameras associated with the event-detected sensor will be displayed in full-screen on the main monitor during the preset dwell time.

3.Highlight the box beside Event Monitoring Dwell Time and then press # . You can adjust the event monitoring dwell time from 3 to 60 seconds.

Rev 3.01	58	Document 900.0315
		10/05